CoolerMaster Stacker with two power supplies, VapoChill XE, AMD 4800+X2, DFI LanParty, 2 gigs GeIL Ultra-X PC4400, 2 XFX 7800 GTX's, 4 76 gig WD Raptors, 3 500 gig Maxtors, 680w ThermalTake and a 600w Enermax. First I pulled apart the VapoChill XE case, took everything out and re-wired and moded it to fit inside the CoolerMaster stacker case. Just like it was made for the case! But I did lose some hard drive space in the front.
Raptors in, Vapo in and working on chill control.
I had already pulled a part the VapoChill XE case. Now to put everything back together. I used the front power panel that came with the CoolerMaster Stacker case. Then used epoxy to mount the chill control temp display to the original front power panel.
Finished the moded original front power panel. I wired the VapoChill to start on the second power supply.
I added a 120X120 fan under the compressor to keep the heat down.
Pulled the front DFI start lights out and added a cmos reset switch to the front of the case to make it much easier to reset the bios. Everything in and ready to test.
Using a windows AC unit to cool video cards, chipset, memory, hard drives and Vapo.
Not to bad all put together and running at 4800+@6000+ -30C
